Recalibrating a fuel transfer pump typically involves adjusting settings to ensure accurate fuel measurement and transfer. Of course when you receive your equipment from us they are calibrated but with continued use the fuel meter may need re-calibration.
Ensure you follow proper safety procedures, such as turning off the power to the pump, wearing appropriate personal protective equipment, and working in a well-ventilated area.
Before making any adjustments, note the current settings and measurements. Your notes will serve as a reference point in case you need to revert to the original configuration.
How to Video Guide
We have a quite a few videos guides to our machines and equipment that many customers find very useful. For any ParkerBrand customer that needs to re-calibrate the meter on their fuel transfer kit you'll find this video guide very useful.
After Recalibration
After recalibrating we advise that you perform the following:
- Conduct a test run with the pump.
- Transfer a known quantity of fuel and compare the measured amount to the expected amount.
- If necessary, fine-tune the calibration settings until accurate measurements are achieved.
Record any changes made during the recalibration process. This documentation can be helpful for future reference and troubleshooting.
Customer After Care
We have a dedicated team in Louth, Lincolnshire who are always happy to speak with customers if they need assistance. While we can't give detailed technical advice over the phone, should an issue arise with you product we have a simple and direct way to pass a case over to our technical team. On point and with deep knowledge of our products, you'll be in safe hands.
